Skip to product information
1 of 3

OVER THE MOON

BOLT ON ONLY

Regular price $93.25 USD
Regular price Sale price $93.25 USD
Sale Sold out
Shipping calculated at checkout.

⚠️ THIS IS A PRE-ORDER ⚠️

Pre-order holds (or sets) are holds we have 3D designs for and a physical 3D prototype, but we have not yet finished texturing and/or making the silicone mold for it.

Pre-order holds can take anywhere from 1-3 weeks to complete, depending on our backlog.

The 3D design is shown here, which does NOT show the texturing we add. See color wheel photo for texture or our other products.

Pizza pie sold separately.

View the 3D Models to see every angle of the hold. Note the 3D images do not show the texture.

πŸ”† Black Light colors are Pastel and glow under UV Light!

πŸ” Description

This set includes:
β–  Full Moon Sloper
β–  Quarter Moon Ledge
β–  Crescent Moon Jug (Bucket)

This set definitely looks best in Eggshell White, Daisy Yellow or Fluorescent Yellow!

Like most large holds, the Full Moon Sloper is partially hollow in the back!

πŸ”© Hardware

Hardware Required:

β–  4.5" Socket Cap Bolt + 3" set screw
β–  3.5" Socket Cap Bolt + 2" set screw
β–  1.5" Socket Cap Bolt + 1.5" set screw

🌈 Important Color Information

It's important to note that there is an inherent issue with viewing colors online.

Screens can show colors differently based on many factors such as manufacturer, type of screen, age of device, blue light filters, manual calibration and more.

The color you see also really depends on the photography. While we do our best to have accurate colors in our photos, our photos are going to look slightly different than someone else's photos which will look slightly different than someone else's, and so on and so on.

Finally, our products are made in small batches and while we do our best to use a "formula" for our colors, minor variations may occur.

For all of these reasons, it's important to accept that all pictures must be taken as a reference only and that what you receive may be slightly to moderately to different than what you're seeing on your device.

Β 

πŸ’§ Materials

Polyurethane Resin, Dye

βž• Additional Info

We make these holds by starting with a 3D printed prototype which we modify. Then we create a mold. The mold is used to cast the final hold in resin.

One of the cool things about the 3D printing community is many creators allow their work to be used, even for commercial use, and simply require a shout out for doing so!

The original design was a moon design form Thingiverse (Thing dfsafd) that we've modified into these holds!

FAQ

Why are your holds cheap? Is the quality Bad?
What is the texture of your climbing holds like?
How strong are your holds?
What are your holds made of?Β 

Β 

Why are your holds cheap? Is the quality Bad?

While our quality is great, aesthetically it's slightly lower than big box hold producers, but it's close. The strength and durability is just as high. The main reason our holds are so cheap is we operate out of our home doing small batch holds with almost no overhead costs.

However, because we are small batch and small business, we do ship items that have minor cosmetic issues. This could be a small dot of another color on your hold (usually no larger than pin sized), a hold that has very minor surface imperfections, or a hold that might have a small piece of dirt, dust or even pet hair embedded in it. We do care about quality and all of these examples would only ship if it's very minor. Bigger imperfections get sold at a discount!

What is the texture of your climbing holds like?

The way we make our holds is usually different than most, because we 3D print the models first we have to add texturing agents to the design after 3D printing and then create the mold from that.

This results in texture made from positive bumps versus negative. In other words regular climbing holds typically have little bumps or bubbles inside the hold while ours have them on the outside. Your hand really won'tΒ  be able to tell the difference though. The good thing is, you can sand our holds down a bit if you want a smoother surface. You can't do that with other holds!

How strong are your holds?

Our holds are made from Polyurethane Resin, the recommend resin for climbing holds. The resin has a tensile strength of 3,000 psi (pounds per square inch) or about 20,685 kPA. Even our smallest foot holds are about half a cubic inch so capable of holding almost 1,500 lbs.

What are your holds made of?

Our holds are made ofΒ Polyurethane Resin and dye (unless you order Eggshell white).Β We add a washer to every bolt on hold that becomes part of the hold and increases the safety and stability of the hold.