Skip to product information
1 of 6

THE OBSESSIVE PROGRESSIVE

BOLT ON or SCREW ON

Regular price $315.60 CAD
Regular price Sale price $315.60 CAD
Sale Sold out
Shipping calculated at checkout.

🚚 Shipping Time

Climbing Holds are made to order and ship in 3-5 Business Days.

Almost all orders are sent via Chit Chats and then follow different paths depending on your country:

USA: Important: USPS Timelines you see in the cart are the times it takes to reach you once the package arrives in the U.S. from Canada. It can take several days to a week to get from our location in Canada to the U.S. shipping point. Orders are dropped off at a local Chit Chats drop off point here in Canada. Chit Chats then takes the packages to Niagara Falls, NY and the package then ships via USPS from there. Shipping varies to the USA depending on your location but most orders are around 1-2 weeks total.

Canada: Expedited Parcel Orders are dropped off at a local Chit Chats drop off point here in Nova Scotia and then are taken to Canada Post for the remainder of the shipping. Since we are on the East coast, shipping varies from a few days to a week or even two if you're on the West coast. Xpresspost orders are dropped off at our local Canada Post.

All shipping times are just estimates and not guarantees. Shipping time can be affected by a lot of things, such as COVID restrictions, busy mail times (often around the holidays), etc.

Mega 38 Climbing Holds Kit for a steal of a price!

This set includes: 

- 7 x Jugs - 2 Small, 2 Medium, 2 Large, 1 Double
- 2 x Horns - Good sized Cone holds
- 8 x Crimps - 2 of each of 4 different styles
- 2 x Dual Tex Ledges - Medium size
- 2 x Rails - Small/Medium sized
- 3 x Pockets - 2 small incut and 1 large
- 2 x Pinches - 1 Small, 1 Large
- 12 x Foot holds - 5 different styles

View the 3D Models to see every angle of the hold. Note the 3D images do not show the texture.

🔆 Black Light colors are Pastel and glow under UV Light!

🔍 Description

■ Small Happy Hands Jug (2) - Great one handed jugs with large incut - perfect hold for easier climbs and beginners.
■ Medium Happy Hands Jug (2) - It's like the small one, but larger!
■ Large Happy Hands Jug (2) - The larger version of the Jugs. Great for two hands so works perfect for a start or top out.
■ Butterfly Jug - two large Happy Hand Jugs put together! Makes this a very versatile hold.
■ Mr. Pinchy - Large sized great pinch hold.
■ Pinchy Jr. - Just a smaller version of Mr. Pinch1y!
■ Crimpus (2) - A classic, round crimp, not too difficult as far as crimps go.
■ Crimp Bizkit (2) - A crimp with a generous incut making it a good starter crimp.
■ Bubble Trubble (2) - A bubbly crimp that can be difficult depending where you grab it.
■ Texan Ledgend (2) - a fun ledge that has a rough top. Perfect intermediate hold.
■ The Pickle (2) - Pickle shaped footholds that can also be used as a pinch or crimp.
■ The Thickle (2) - A thicker pickle which makes for a better crimp or pinch.
■ Bermuda Triangle (2) - Footholds you can orient different ways for increased difficulty. Also can be used as tough crimps.
■ Lucky Seven (2) - 7 sided footholds.
■ Dubble Bubbles (4) -Very small footholds.
■ Bananarama (2) - Crimpy rails about a foot long.
■ Indiana Cones (2) - A cone Horn. Gives Jugs a run for their money for easiest holds.
■ Pock-Cut (2) - Two finger pockets with great incut goodness.
■ Crimpleton (2) - Good triangular shaped crimp with an incut
■ Pocket To Ya - Larger 2 finger pocket hold with no incut.

🔩 Hardware

The following Hardware is needed for this set if you don't purchase the kit including hardware. This all assumes you have a 3/4" wall.

If you are using bolts and t-nuts:
- 30 Socket Cap bolts ranging from 1.5-2.5"
- 8 Flat Head Bolts 1.5-2" (fully threaded)

If using screw on, you'll need many screws (structural screws HIGHLY recommended) and some bolt to screw adapters like a "Lonestar"

🌈 Important Color Information

It's important to note that there is an inherent issue with viewing colors online.

Screens can show colors differently based on many factors such as manufacturer, type of screen, age of device, blue light filters, manual calibration and more.

The color you see also really depends on the photography. While we do our best to have accurate colors in our photos, our photos are going to look slightly different than someone else's photos which will look slightly different than someone else's, and so on and so on.

Finally, our products are made in small batches and while we do our best to use a "formula" for our colors, minor variations may occur.

For all of these reasons, it's important to accept that all pictures must be taken as a reference only and that what you receive may be slightly to moderately to different than what you're seeing on your device.

 

💧 Materials

Polyurethane Resin, Dye

➕ Additional Info

Many of our holds are 3D printed first then molded in silicone to finally cast into the final hold!

One of the cool things about the 3D printing community is many creators allow their work to be used, even for commercial use, and simply require a shout out for doing so!

The holds that were designed by others can all be found on Thingiverse (Things 4852256, 3860696, 13034, 3623684, 4078517 and 3601834)

FAQ

Why are your holds cheap? Is the quality Bad?
What is the texture of your climbing holds like?
How strong are your holds?
What are your holds made of? 

 

Why are your holds cheap? Is the quality Bad?

While our quality is great, aesthetically it's slightly lower than big box hold producers, but it's close. The strength and durability is just as high. The main reason our holds are so cheap is we operate out of our home doing small batch holds with almost no overhead costs.

However, because we are small batch and small business, we do ship items that have minor cosmetic issues. This could be a small dot of another color on your hold (usually no larger than pin sized), a hold that has very minor surface imperfections, or a hold that might have a small piece of dirt, dust or even pet hair embedded in it. We do care about quality and all of these examples would only ship if it's very minor. Bigger imperfections get sold at a discount!

What is the texture of your climbing holds like?

The way we make our holds is usually different than most, because we 3D print the models first we have to add texturing agents to the design after 3D printing and then create the mold from that.

This results in texture made from positive bumps versus negative. In other words regular climbing holds typically have little bumps or bubbles inside the hold while ours have them on the outside. Your hand really won't  be able to tell the difference though. The good thing is, you can sand our holds down a bit if you want a smoother surface. You can't do that with other holds!

How strong are your holds?

Our holds are made from Polyurethane Resin, the recommend resin for climbing holds. The resin has a tensile strength of 3,000 psi (pounds per square inch) or about 20,685 kPA. Even our smallest foot holds are about half a cubic inch so capable of holding almost 1,500 lbs.

What are your holds made of?

Our holds are made of Polyurethane Resin and dye (unless you order Eggshell white). We add a washer to every bolt on hold that becomes part of the hold and increases the safety and stability of the hold.